Notification Specification

On an nPOC-BB (Gamma) unit running firmware v3.5, the LED notification lights will notify the user according to the specification in the table below.

Status LED	Status	Battery LED	Battery	Description	User action
	Off		Off	Module is off for storage or transport	Turn on the power switch before starting a run
	Off		Any	Module is ready	Can load STC in the module
	Green (flashing)		Any	Run is in progress	Wait until the run is completed
	Green		Any	Run is completed	Remove Sample Tube for next user step
	Yellow (flashing, 3 s)		Any	ST/TC is not loading correctly	Remove and reload ST/TC
	Yellow		Any	Device is not ready	Do not load sample tube/test consumable
	Red (flashing, 3 s)		Any	Error encountered. LED will transition to solid red	No action
	Red		Any	Run is stopped with error. Run is invalid	Remove Sample Tube from the unit and do not proceed to next user step
	Yellow/Purple (alternating)		Any	Critical device error	Request for service from a qualified technician
	Any		White	Battery is >90%	No action
	Any		Yellow	Battery is sufficient for 1 run	Recharge battery as soon as possible
	Any		Red	Battery is insufficient; Module will not allow a run	Recharge battery
	Any		Blue (breathing)	Module is charging	No action
	Blue (breathing)		Blue (breathing)	Module is in mass storage mode	Access log file or changing config parameters via PC